B Trolley and Accessories
Operator’s Manual B - 3
MT2 Trolley
Figure B-2 Overview of the Trolley
12. Equipotential terminal Used for equipotential connection, balancing the
protective earth potentials between the system and other
electrical equipment.
13. Anti-theft lock Used for releasing the main unit from the trolley.
14. Main unit tray Used for placing and fixing the main unit. You can remove
the tray and install the U-Bank (purchased separately)
instead.
NOTE:
Keep the main unit tray carefully for future use after it
is removed from the trolley. Reinstall the main unit tray
to the trolley if the U-Bank has been removed from the
trolley.
15. Height lever Used for adjusting the height of the stand.
16. Tray release lever (located
on the bottom of the handle)
Used for removing the main unit tray.
No. Item Description