3-64 Operating the program control screen
3Explanation of operation methods
(3) Name change of the program (Rename)
1) Select the rename menu
Press the function key corresponding to the "RENAME" by program list display. Display the rename
screen. If the "renaming" menu is not displayed, press and display the [FUNCTION] key.
2) Specification of the program which changes the name.
In the parenthesis of the renaming source, the program name beforehand selected by the program
list screen is displayed. (The figure the program name "1") If it changes, move the cursor by the arrow
key.
Into the parenthesis of the renaming destination, input the new program name and press the [EXE]
key.
<FILE/EDIT>　 　1/ 20 Rem 136320
1　　　 　 08-04-24　17:20:32　 22490
2　　　 　 08-04-24　14:56:08　 694
A1　　 　 08-04-24　13:05:54　 2208
B1　　 　 08-04-24　13:05:54 　1851
RENAME
DELETE PRTCT
CLOSE
123 ⇒
<PROGRAM RENAME>　
　 　
SRC.NAME ( 1 )
DST.NAME ( )
CLOSE
　 123
<FILE/EDIT>　 　1/ 20 Rem 136320
2　　　 　 08-04-24　14:56:08　 694
3　 　 　 08-04-24　13:05:54　 2208
4 　　 　 08-04-24　13:05:54 　1851
31 08-04-24 17:20:32 22490
EDIT POSI.
NEW
COPY
123 ⇒
<PROGRAM RENAME>　
　 　
SRC.NAME ( 1 )
DST.NAME ( 31 )
CLOSE
　 123
The program name protected cannot be changed.
The program name with which command protection is set up cannot be changed. Please execute after
removing command protection.
To Next Page
Loading...
Need help?
General
