Motorola Razr V3x Personalization Guide (MoGu V3xPG) V2.5
(Volume 1 - Primary Mods)
V3X Personalization Guide-V2-5-eb-v1-061205.doc 97 of 227
ebentley
Cingular profile but the hacked profiles were deleted from WITHIN the WebSession file.
So, in the course of typing this response, I just thought of something. Perhaps I should "lock" the individual
MEdianet, and MMS profiles using Leader GL FlexEditor 10.5 XP to protect them from deletion. As I check my
phone right now the Cingular profile is definitely locked. I should probably test this theory by either:
(1) locking the other profiles and doing another master clear to see if I keep them or
(2) Unlocking the Cingular profile; do the master clear and see if all profiles are deleted.
Right now, I'm too busy but I'll give it a try shortly. Anyway your thoughts are appreciated along with anyone else who
can shed any experience/perspective on this.
@Samnahata: Thanx much for your feedback as well.
2.12 How to Bring Back Your Dead Phone (Extract from BigDaddy5 – HOFO)
If your phone doesn't turn on, or even powers on for half a second and then keeps going through a power cycle by
itself, your phone has a corrupt flash.
This CAN be fixed though. You must take the phone and put it into Bootloader mode. It varies on each phone how you
do it, but holding * and # and then power is the most common way. If your phone won’t even power on, then it may
take some time to get it to turn on. Took me 3 days once. I did find that by plugging it into the USB port while
attempting Bootloader helped later on speed that process up. Here’s a “process” trick for the *, #, power on sequence.
First I pressed *, then #, and last, POWER. Then I released power and you should hear some beeps from the
computer as the phone connects in USB mode. You’re now in Bootloader mode and ready to Flash your phone.
Now ta tever type of
pho
Nav at
you e
bac n
status. r, a monster flash is a flash that includes both a flash file and a flex so you’re going to have to
personalize you phone as if it were brand new.
ery Careful!!)
Som im
Usin P
The e
u
ou should be successful. You'll have to do this for each file
Hope this helps.
Caution areful and be sure you know what you’re
doin g
happen ssibly prevent a
“fre
s rt RSD Lite 3.0 and it should show your phone connected as a Neptune Flash Interface (or wha
ne yours is).
ig u find an unlocked one) and select “open”. In a couple of seconds
’ll s e the pertinent information regarding the flash file you’re loading appear in a window. Then hit “START”; sit
e to your monster flash file (Make sure yo
k a d wait for the flashing process to complete. Hopefully, when everything is done, you’ll see “PASSED” as a
Remembe
2.13 How to delete “protected” files (Be V
et es, you may experience some problems in deleting some files like skins. Try this:
g 2K Commander, version 3.2.9 or 3.3.0 (beta): Look at the file attributes for each file you're trying to delete.
y'r probably set for 07 0004.
1. Click one of the files you're trying to delete and click "attributes" button. A window will pop up and yo
should see "owner=07:USB cable and attributes= 0004.
2. Unclick the box that says "System, survive Master reset/clear". This will change the file's attribute to 07
0000.
3. Then click OK. Now try to delete the
file--y
you're trying to delete or master reset/clear.
: If you’re trying to delete protected files other than skin files. Be c
g. Deleting the wrong files could “brick” your phone. Also suggest keeping the Moto skin just in case somethin
s to your personalized skins. This way, the phone will always have a skin to load and could po
eze up”.
To Next Page
Loading...
Need help?
General
