Motorola Razr V3x Personalization Guide (MoGu V3xPG) V2.5
(Volume 1 - Primary Mods)
V3X Personalization Guide-V2-5-eb-v1-061205.doc 63 of 227
ebentley
ash stops and fails
ts charged
e (multiline
ex/LP.
UL LASH"
.24
P= While flashing phone display "critical error" while in boot loader and fl
F= Unplug phone, turn off, then turn on and it should turn on normally, then connect up again making sure i
up and start the flashing again
= After flash with new MP i have a lil symbol in the top with a phone receiver and 1. (means you are using line 1) P
F= To remove open P2k tools > other features > Get > other > untick "settings > phone status > active lin
support)
P= After Flashing you get "Verifying Checksums" error, do not worry.
F= Phone will work normally, if you encounter any problems flash it again with the same MP/Flash/Fl
mserver This guide has been made by Pioneer @ Gs
P= When you flash and at the end of the flash Massage will come up "UNSUCCESSF F
F= Phone will work normally, and will have the new SW, if you encounter and issues/problems flash again with the
MP/Flash again. By codename78
1
Military Time (How to change time and date formats)
version?
change the date on the home screen from "day-month-year" to "Month Day Year"?
Does anyone know how to change the time on the home screen from military time (24 hour) into the 12 hour
Hey, while I'm at it, any way to
(Might as well go for broke, right?)
Answer: How-To [Steve8411]
Settings>initial setup>time & date>(set to auto OFF) ...then edit time move over to am/pm and scroll to 24hour. Go
back set time /date to auto update. You’re done.
1.25 How to Format your Micro SD Memory Card (Franklin_)
Problem: Franklin ran into the followin
A nephew of a friend of mi
when i charged
card
g problem with his Micro SD Memory Card
ne, was messing around with my phone, and got low battery. It went off,
it, the phone stated that the memory was full, so i connected the phone in memory
mode, and formatted in FAT32. Now it still says that it has 0.00 Free space, what should I do?
Solution: (Compiled from comm
Later post: I've solved it, I had to for
ents made by Franklin_ and
Rick Van Hazel):
mat it in FAT mode, not FAT32, thanks anyways
them on the
n, pop the card into a PC and format it. If you aren’t familiar with formatting drives check
with someone you know that can help you." So Franklin, with your help, we know to format the card
in FAT mode and not FAT32.
(Rick Van Haze)I purchased a cheap SD memory reader and plugged the Transflash memory card
(aka Micro SD) to the SD adapter and it immediately read as a removable storage drive on my
Windows XP based computer. That is of course for my desktop that doesn’t have SD slots. But I also
now have the option of moving the files to the laptop and using wireless to push it out onto my other
home computers. In the past I experienced some file corruption when I tried to read
phone. I fixed this by formatting the card (just like formatting a built in hard drive). Not sure if this was
a problem of how the phone formatted the memory when it built all the default directories or if it was
the reader or card itself. But the format fixed it with no further issues. If you have any problems with
file corruptio
To Next Page
Loading...
Need help?
General
