Motorola Razr V3x Personalization Guide (MoGu V3xPG) V2.5
(Volume 1 - Primary Mods)
V3X Personalization Guide-V2-5-eb-v1-061205.doc 66 of 227
ebentley
w y
Solution: [Alsitn]: shiggy822 must flash with PST using master clear + master reset + power off phone + override if
newer. Else the problem with persist if using RSD or other flashing tools. Similar issue in a thread of a week ago
already solved this a
1.29 Animated .gif Playback Speed on the V3x
eed, try this: Navigate to Settings>Multimedia>Pictures
e the
playback speed.
reen” viewing mode and you will see playback speed get
nd forth to fully appreciate the speed difference
If you want to see a difference in animated .gif playback sp
• Select an animated .gif file from your library to view. When it opens, it will be in “edit” mode. Not
• Now, hit the “*” button to toggle to “full sc
noticeably faster. You can toggle back a
1.30 Cellular Subsidy Codes and PUK Codes
1.30.1 Subsidy Codes
Cellular phone subsidy lock Document Type and Number: United States Patent 6314283
http://www.freepatentsonline.com/6314283.html
Abstract: A cellular phone subsidy lock which ensures that a cellular phone, sold to an end-user at a price subsidize
by a cellular carrier, is activated only on the subsidizing carrier's network, and not on a competitor's network. A secu
carrier code, specific to and known by the subsidizing carrier, is programmed into the cellular phone by th
manufacturer. The phone is programmed and shipped by the manufacture
d
re
e phone
prog
code or a
(Electron
exec
code
using the
remo l d
only .
When a
r in a locked condition, which prevents
ramming of the NAM (Number Assignment Module) of the cellular phone without first entering either a valid unlock
valid remove lock code. At the time of phone activation and programming of the NAM, the phone's ESN
ic Serial Number) is entered into the carrier computer system, which utilizes the ESN and carrier code to
a subsidute y lock algorithm which outputs an unlock code and a remove lock code. At the carrier's choice, either
is given to the end user to be entered into the phone. The phone then executes the same subsidy lock algorithm,
carrier code programmed at the time of manufacture, and it's own ESN, to calculate the unlock code and the
ve ock code. If the code entered by the user matches the unlock code, NAM programming is allowed to procee
once, and if the entered number matches the remove lock code, the phone removes the subsidy lock completely
cellular phone is purchased in combination with a cellular service agreement (contract), new or renewal,
rom a carrier or through a dealer, the price of the phone is usually discounted due to a "subsidy" by the carrier,
pects to make back the subsidy over the
directly f
whic ex course of the service agreement. Part of the way carriers ensure that
ng" the phone to the carrier so that it can't be used on the service of another carrier. This
h
will happen is by "locki
part laicu rly applies to
GSM where all that's needed to switch carriers is to switch the SIM.
Wh a
• locked for the unlock code. Different carriers have different policies:
o Some carriers won't unlock at all.
o Other carriers may require some minimum period of service before unlocking.
o Yet other carriers may only unlock after the service contract has been completed.
o Another common requirement is for the account to be in good standing.
• Use a 3rd-party unlocking service:
o Check with independent cellular dealers in your local area.
o Search the Internet for a non-local unlocking service
en phone has been locked to a given carrier, it must be "unlocked" in order to be used on some other carrier:
Ask the carrier to which it is
To Next Page
Loading...
Need help?
General
