Motorola Razr V3x Personalization Guide (MoGu V3xPG) V2.5
(Volume 1– Primary Mods)
V3X Personalization Guide-V2-5-eb-v1-061205.doc 36 of 227
ebentley
To activate custom shutdown sounds, edit the following SEEM
No something to help you recover if you have to.
a. SEEM 004a_0001 > offset 24 [Set 01]
1.7.3 Custom Startup/Shutdown Animation (Works for the V3 but doesn’t on the V3x-Yet):
a.
fold
b. Deactivate Moto startup animation - SEEM 0032_0001 > offset 1D > bit 3 [Uncheck]
c. D
d.
e. Activate Custom ation - SEEM 0032_0001 > offset 46 > bit 0 [Check]
f. S
Fo
Fo [Set 00]
* S
*****ALTERNATIVE METHOD that Works (backup these 2 files first!):
llows:
splash_pwr_up_a_full.gif
riginal files identified above to your hard drive
de, and appropriately named GIFs to a/mobile/system
te: Back the SEEM up first so you’ll have
Create Custom startup/shutdown (custwakeup.gif & custgoodbye.gif) animation (240 x 320) and store them in /a/
er.
eactivate Moto shutdown animation - SEEM 0032_0001 > offset 31 > bit 0 [Uncheck]
Activate Custom startup (custwakeup.gif) animation - SEEM 004a_0001 > offset 23 [Set 01]
shutdown (custgoodbye.gif) anim
plash screen (not an animated GIF):
r Blue (Purple) Flower Hellomoto Splash screen - SEEM 004a_0001 > offset 1C0 [Set 01]
r Hellomoto Splash screen - SEEM 004a_0001 > offset 1C0
plash screen can not be turned off. As of now, this SEEM has not been discovered.
1. Create you own GIFS (sized the same as the 2 named below) and name them as fo
a. splash_pwr_dwn_a_full.gif
b.
2. Backup the o
3. Copy your custom ma
stom startup and shutdown GIFs
1.7.4
Q. I loaded my own custom cl.gif, however, image on the outer LCD won't change.
An
4. Power cycle your phone and you should see your cu
How do I change the outer LCD to a custom cl.gif (Tiddles and
altezza_lex) Note: This mod is not working in the
latest firmware releases like 85.9B.A1P
swer. Customized Outer LCD (cl.gif) Directions (Partial Solution)
• Upload your desired 96x80 (pixel) cl.gif using the program of your choice, to /a/mobile (NOT
/a/mobile/system
Make sure the file is named “cl.gif” NOT “cl.gif.gif”.
• Open LeaderGL FlexEditor and go to Struments -> SEEM Explorer. (Or use
).
another SEEM editor you like - I
le for SEEM up/downloads and XVI32).
prefer p2kman which is compatib
• Download the following SEEMs from the phone and make copies of files as backups
:
• 004a_0001 (Offset 27, value=00 meaning no Bits are checked)
• 0061_0001 ([]/[]a[]/[]c[]l[].[]g[]i[]f[][])
• 0062_0001.( []/[]a[]/[]c[]l[].[]g[]i[]f[][])
• Download the modified 0061_0001.SEEM HERE or make sure it looks like this:
To Next Page
Loading...
Need help?
General
