MTS Systems FlexTest IIm User Manual

MTS 793 Controller Hardware
FlexTest GT Controller Connections
114
Analog inputs The analog-to-digital mezzanine cards accommodate up to eight
analog input signals. Each A/D input signal must be within ±10 volts.
• Analog inputs can be connected at the BNC connectors of a Model
493.81 Analog In transition module and the outputs from this
module are connected to the Model 493.50 ADDA II module.
• Analog inputs can be connected at the BNC connectors of a Model
493.83 Filtered Analog Input transition module and the outputs
from this module are connected to the Model 493.50 ADDA II
module.
Input 1
Input 2
Input 3
Input 4
J11, J13
J15, J17
J12, J14
J16, J18
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
Input 5
Input 6
Input 7
Input 8
To
A/D
From
493.81 Analog In
Module
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

MTS Systems FlexTest IIm Specifications

General

Brand	MTS Systems
Model	FlexTest IIm
Category	Controller
Language	English