MTS Systems FlexTest IIm User Manual

MTS 793 Controller Hardware FlexTest IIm Controller Connections
181
Digital Outputs • Digital outputs provide an optically isolated open collector/open
emitter output.
• The digital outputs are controlled by the Digital Output process in
the MultiPurpose TestWare application. They can also be
controlled manually in the Station Manager application.
• Each digital output connector located on the Digital I/O Access
Panel supports two channels.
• Each digital output is an open collector/open emitter rated at 30 V
DC max at 50 mA max.
J1 - 2
6
2
1
7
X1
12 volt common
+CH1
-CH1
External Switch
or
Relay Contact
External Device
3
21
+12 VDC
+12 VDC
J3 - 4
9
4
5
8
X4
12 volt common
+CH4
-CH4
External Device
3
21
+12 VDC
+12 VDC
Digital I/O
Access Panel
498 Digital I/O
Transition Module
Opto-
Coupler
Digital I/O
Access Panel
498 Digital I/O
Transition Module
Opto-
Coupler
This shows how to
connect an external
switch or a set of relay
contacts to channel 1 of
the digital inputs.
This shows how to
connect an external logic
signal to channel 4 of the
digital inputs.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

MTS Systems FlexTest IIm Specifications

General

Brand	MTS Systems
Model	FlexTest IIm
Category	Controller
Language	English