Native Instruments Maschine MIKRO User Manual

On the display of your controller, the Browser is organized as follows:
▪ When the F1 button (FILTER) is selected, you can narrow your search by using the F3 but-
ton, the Left/Right Arrow buttons, and the Control encoder to select the file type, the con-
tent type (factory or user files), the product/bank/sub-bank, and the desired Type (and pos-
sibly Mode) tags.
▪ When the F2 button (LIST) is selected, you see the corresponding search result list. Using
the Control encoder you can select and load the desired file.
The above steps are described in detail in the following sections. In addition, you will find on
your controller most of the browsing aids available in the software, as described in section
↑3.3, Additional Browsing Tools.
If you want to use your hardware a lot make sure you tag all the files you want to use
extensively! This makes it a much easier to access them using the hardware.
3.2.2 Selecting or Loading a Product and Selecting a Bank from the Browser
The Product selector allows you to limit your search to a certain product category, a particular
product, or a specific bank of the product. You can also load a product along with its default
preset file directly from the Product selector (see below).
By default there is no particular selection in the Product selector; it reads All Instruments:
Browser
Searching and Loading Files from the Library
MASCHINE MIKRO - Manual - 106

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English