Native Instruments Maschine MIKRO User Manual

Section/Parameter Description
Keyboard
Velocity Scaling menu Adjusts how your playing is translated into velocity values.
See section ↑15.3, Navigating and Controlling Your
Sounds within a Group.
Light Guide
Enabled check box Switches the colored LEDs of the Light Guide (above the
keybed) on or off. See section ↑15.3, Navigating and
Controlling Your Sounds within a Group.
Transport Control
Enabled check box Switches the transport functions of your keyboard in
MASCHINE on or off. See section ↑15.2, Controlling the
Transport in MASCHINE.
Pitch Strip and Modulation Strip
All parameters Adjust the behavior of the touch strips. See section ↑15.6,
Using the Touch Strips.
Touch-Sensitive Knobs
Touch Auto-write check box Enables or disables the Touch Auto-write option. See
section ↑15.7, Recording Modulation from Your Keyboard.
15.9 Arp Hold Mode
The arpeggiator "Hold" function allows you to latch the notes played by the arpeggiator.
To use the Hold function from your hardware:
1. Press SHIFT + PAD MODE to enter keyboard mode.
2. Press and hold NOTE REPEAT to access the arpeggiator.
3. Press the Right Arrow button under the display to select the HOLD parameter.
KOMPLETE KONTROL Integration
Arp Hold Mode
MASCHINE MIKRO - Manual - 877

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English