Native Instruments Maschine MIKRO User Manual

Element Description
SCALE Section
Velocity Adjusts the velocity response of the drum. Available values range
from -100.0 % to 100.0 % (default value). At zero (mid course),
the drum is played at full velocity, no matter how hard you hit the
keys (or pads). From that mid position, by turning the knob to the
right you increase the positive velocity response and make the drum
more and more sensitive to the velocities at which you hit the keys/
pads. From the mid position, turning the knob to the left as the
inverse effect: the harder you hit the key/pad, the softer the
resulting drum sound will be.
10.3.2 Snare – Bit
The Bit snare is a thin, harsh, digital snare.
The parameters described below are presented as they appear in the Control area (Ar-
range view). The same parameters are available in the Plug-in panel within the Plug-in
Strip (Mix view). See ↑9.4, The Plug-in Strip for more information on this.
Main Page
Element Description
MAIN Section
Engine Selects the engine used in the Snare Plug-in. If you change this
setting, please refer to ↑10.3, The Snares.
Tune Adjusts the pitch of the drum played by the middle C, measured as
a percentage. Available values range from 0.0 % to 100.0 %
(default: 50.0 %). For more details see ↑10.1.5, Pitch Range,
Tuning, and MIDI Notes.
Decay Adjusts the duration of the sound’s tail, measured as a percentage
(default: 50.0 %).
Using the Drumsynths
The Snares
MASCHINE MIKRO - Manual - 525

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English