Native Instruments Maschine MIKRO User Manual

Selecting and Managing Zones on Your Controller
You can select and remove Zones on your controller.
Selecting a Zone
►
On the ZONE page of Sampling mode, press F1 (PREV) or F2 (NEXT) to set the focus to
the previous or next Zone in the Zone List, respectively.
→
The waveform of the Sample in this focused Zone appears on the display, and the Zone
settings appear at the bottom of the display.
Multiple selection is not possible from the controller. Hence, setting the focus to the
previous/next Zone automatically deselects any other Zone, the focused Zone now being
the only selected Zone.
The Sample can be played back on the Cue channel at any time by pressing the corresponding
pad on your controller. When the Sample is played back, the Playhead indicator (vertical line)
shows you the current play position within the waveform on the right display.
For more information on the Cur channel, please refer to section ↑9.2.6, Using the Cue
Bus.
Removing a Zone
►
On the ZONE page of Sampling mode, press SHIFT + F3 (REMOVE) to remove the fo-
cused Zone from the Sound.
14.5.4 Selecting and Editing Zones in the Map View
The Map view is visible when the Sample View button (showing a little waveform icon at the
right of the Zone tab) is disabled.
Sampling and Sample Mapping
Mapping Samples to Zones
MASCHINE MIKRO - Manual - 816

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English