Native Instruments Maschine MIKRO User Manual

Choosing an Input Quantization Mode
In the software the Input Quantization can be configured via the Quantize setting available in
the Input section at the bottom of the General page in the Preferences panel:
►
Click the Quantize menu and select the desired Input Quantization mode from the three
modes available (see their description above).
Choosing an Input Quantization on Your Controller
On your controller the Input Quantization can be configured via the recording settings:
1. Press SHIFT + GRID to show the recording settings.
2. Press the Right Arrow button repeatedly to display the QUANTIZE MODE parameter (the
last parameter).
3. Turn the Control encoder to select the desired Input Quantization mode from the three
modes available (see their description above).
7.4.9 Doubling a Pattern
Your controller provides a useful shortcut to double the length and content of the current Pat-
tern. In the software, you can do this for example by copying all events, putting the Playhead
indicator at the end of the Pattern, and pasting the events (the Pattern Length is automatically
doubled).
To double the length and content of a Pattern:
1. Hold PATTERN to enter Pattern mode.
2. Select the desired Pattern by pressing its pad.
3. Press F1 (DBL).
→
The Pattern is doubled.
Keep in mind that doubling a Pattern twice results in a Pattern that is four times as
long.
Working with Patterns
Editing Events
MASCHINE MIKRO - Manual - 360

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English