Parameter Description
KEYBD (F1) Activates/deactivates Keyboard mode. In this mode your pads play
notes of the focused Sound at 16 different pitches. This is well
suited for melodic instruments. See the next paragraph for a detailed
description of the Keyboard mode. Please note that Keyboard mode
is not compatible with 16 Velocities mode (see below).
16 VEL (F2) Activates/deactivates 16 Velocities mode. In this mode your pads play
the same note of the focused Sound but with 16 different velocity
values. This can be useful to play or program complex drum fills. The
pitch of the played note is defined by the base key (see section
↑5.1.3, Adjusting the Base Key). Please note that 16 Velocities
mode is not compatible with Keyboard mode (see above) nor the
Fixed Velocity option (see below).
FIX VEL (F3) Activates/deactivates the Fixed Velocity option. This option is
available when your pads are in Group mode (default mode) or
Keyboard mode. With this option enabled, your pads play at the
same volume no matter how hard you hit the pads. Obviously, this
option is not compatible with the 16 Velocities mode described
above: hence, their buttons are mutually exclusive.
At the bottom of the display, use the Left/Right Arrow buttons and the Control encoder to se-
lect and adjust following parameters, respectively:
Parameter Description
1/6: CHOKE GROUP Selects a Choke group for the selected pad. See section ↑5.1.4,
Using Choke Groups for more information.
2/6: CHOKE MODE Selects a Choke mode for the selected pad. See section ↑5.1.4,
Using Choke Groups for more information.
3/6: LINK GROUP Selects a Link group for the selected pad. See section ↑5.1.5, Using
Link Groups for more information.
4/6: LINK MODE Selects a Link mode for the selected pad. See section ↑5.1.5, Using
Link Groups for more information.
Playing on Your Controller
Adjusting Your Pads
MASCHINE MIKRO - Manual - 221
To Next Page
Loading...
Need help?
General
