Native Instruments Maschine MIKRO User Manual

Element Description
Decay Adjusts the duration of the sound’s tail, but also the “spread”
between the individual claps, measured as a percentage. Available
values range from 0.0 to 100.0 % (default: 50.0 %).
Room Adjusts the balance between the dry sound — the claps themselves
— and the synthesized room sound, measured as a percentage.
Available values range from 0.0 to 100.0 % (default: 50.0 %). At
high values, extra “air” is added.
Focus Adjusts the sharpness of each clap, measured as a percentage.
Available values range from 0.0 to 100.0 % (default: 50.0 %). At
0.0 % the sound is very smooth; at 100.0 % the claps are very
sharp and staccato.
Advanced Page
For this engine the Advanced page does not contain any parameters.
Modulation Page
As with all other engines and Drumsynths, the Modulation page contains one parameter: Veloc-
ity.
Element Description
SCALE Section
Velocity Adjusts the velocity response of the drum. Available values range
from -100.0 % to 100.0 % (default value). At zero (mid course),
the drum is played at full velocity, no matter how hard you hit the
keys (or pads). From that mid position, by turning the knob to the
right you increase the positive velocity response and make the drum
more and more sensitive to the velocities at which you hit the keys/
pads. From the mid position, turning the knob to the left as the
inverse effect: the harder you hit the key/pad, the softer the
resulting drum sound will be.
Using the Drumsynths
The Snares
MASCHINE MIKRO - Manual - 539

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English