Native Instruments Maschine MIKRO User Manual

The Phaser in the Control area.
Parameter Description
MAIN Section
Frequency This defines the center frequency of the Phaser.
Feedback Adjusts the amount of output signal fed back into the input.
8Pole Activating this causes the Phaser to use the 8Pole mode,
resulting in a more intense phasing effect.
MOD Section
Amount This defines how much the Phaser gets modulated by the
modulation source.
Source Here you can select the modulation source of the Phaser:
available options are LFO, LFO Sync, and Envelope. Depending
on your selection, the parameter to the right will change.
Speed (LFO) Defines the speed of the LFO in a range from 0.03 Hz up to
8 Hz.
Speed (LFO Sync) Defines the speed of the LFO in note values from 16/1 (one
cycle every 16 bars) up to 1/16 note.
Shape (Envelope) Change the shape of the envelope here.
Stereo This parameter widens the stereo field of the effect.
OUTPUT Section
Mix Mix lets you adjust the amount of the effect in relation to the
dry original audio signal.
Effect Reference
Modulation Effects
MASCHINE MIKRO - Manual - 646

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English