Native Instruments Maschine MIKRO User Manual

Adjusting the Perform Grid and Retrigger setting.
►
To adjust the Perform Grid, click the value left of the SYNC label in the MASCHINE
Header and select the desired division from the menu:
→
The next time you select a new Section or group of Sections for looping, the switch will
happen on the next division selected here.
►
To enable/disable the Retrigger setting, click the little cog wheel in the MASCHINE
Header and select Retrigger from the menu.
→
The next time you select a new Section or group of Sections for looping, the new loop will
start from the beginning of the first Section (Retrigger enabled) or from the same position
as where it left the current Section (Retrigger disabled).
13.1.3.2 Jumping to Other Sections using the Controller
To adjust the Section Sync setting:
1. Press and hold GRID to enter Grid mode (or pin it by pressing GRID + CONTROL).
Working with the Arranger
Arranger Basics
MASCHINE MIKRO - Manual - 707

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English