Native Instruments Maschine MIKRO User Manual

6. Press F3 (APPLY) to export the Slices.
→
The Slices will be mapped to individual notes of the selected Sound, starting with the
bottom C (C-2 in MASCHINE convention). The base key of the Sound will be set to the
bottom C as well (see section ↑5.1.3, Adjusting the Base Key for more information on the
base key). Any previous content in the Sound will be replaced. Your controller will leave
Sample mode and return to Control mode. The pads will switch to Keyboard mode so that
you can directly play your Slices on the pads. Additionally, depending on the setting of
the Pattern Creation selector in the Slice page of the software, notes will be automatically
created for each Slice (see above for more information).
At any time you can press the lit F2 button (APPL.TO) to cancel the export and return to
the SLICE page.
Exporting the Slices to a Group
1. Press F2 (APPL.TO).
The F2 button lights up, the APPL.TO label is highlighted, and a message at the bottom
of the display invites you to select a Sound or a Group to export the Slices to.
2. Press GROUP to start selecting the Group containing the target Sound.
The GROUP button turns fully lit.
3. Press the desired pad 9–16 to select the Group. If your Project has more than eight
Groups, once you have pressed GROUP you can use the Left/Right Arrow button to switch
to another Group bank.
The selected pad starts flashing.
4. Press F3 (APPLY) to export the Slices.
→
The Slices will be mapped to individual Sound slots, replacing their current content (if
any). Only the first 16 Slices will be exported. Your controller will leave Sample mode
and return to Control mode. The pads will switch to Group mode so that you can directly
play your Slices on the pads. Additionally, depending on the setting of the Pattern Crea-
tion selector in the Slice page of the software, notes will be automatically created for
each Slice (see below).
At any time you can press the lit F2 button (APPL.TO) to cancel the export and return to
the SLICE page.
Sampling and Sample Mapping
Slicing a Sample
MASCHINE MIKRO - Manual - 807

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English