Native Instruments Maschine MIKRO User Manual

Setting Description
Velocity Scaling Velocity Scaling determines how your playing is translated into
velocity values: starting from Soft 3 (a soft touch is enough to
get a big velocity value) through Linear to Hard 3 (you really
have to hit the pad hard to get a big velocity value).
Display
Brightness The Brightness slider allows you to adjust the brightness of the
display on your MASCHINE MIKRO controller.
Contrast With this slider you can adjust the contrast of the display.
Adjusting the Settings from the Hardware
You also have access to the Sensitivity, Brightness, and Contrast settings from your controller.
To do this, you first have to enter MIDI mode:
1. Press SHIFT + F1 (MIDI) to switch your controller to MIDI mode.
2. Press NAV + F3 (SETUP) to show the Setup Display mode.
3. Press the Left Arrow button repeatedly until BRIGHTNESS appears in the display, and
turn the Control encoder to adjust the Brightness parameter described above.
4. Press the Right Arrow button to show the CONTRAST parameter in the display, and turn
the Control encoder to adjust the Contrast parameter described above.
5. Press the Right Arrow button to show the PAD SENSIVITY parameter in the display, and
turn the Control encoder to adjust the Sensitivity parameter described above.
6. When you’re done, press SHIFT + F1 (MIDI) again to quit the MIDI mode and get back to
MASCHINE mode.
For more information on the MIDI mode, please refer to the Controller Editor Manual.
Basic Concepts
Preferences
MASCHINE MIKRO - Manual - 89

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English