OLED User Interface
98
Part 1128351_02
E 2020 Nordson Corporation
Setting Up Maintenance Reminders
Use the Maintenance system to monitor and remind you when to inspect,
perform maintenance or replace the following components.
Component What you need
to do
Based on Default / hrs Minimum / hrs Maximum / hrs
Piston Pump Lubricate the
pump
Pump On hours
500 160 6000
Hydraulic Filter Change filter 2000 480 6000
Fill System
Filter
Change the air
filter
500 40 6000
Service Alert
Check System
500 40 500
General
Purpose
User-defined
1000 160 30000
Inline Filter Change filter Pump On hours 2000 160 6000
Tank Drain and flush Heater On
hours
2000 480 6000
Hose
Replace
Hose Heating
hours
6000 2000 30000
Module
Run System
State hours
1000 480 30000
Solenoid 1000 480 30000
Nozzle 1000 160 30000
NOTES:
S Use the BBconn Cloud Application or the touch screen version to
Add, Modify, or Delete maintenance reminder hours and snooze
settings.
S If you perform maintenance or replace a component before receiving
a maintenance reminder, you must reset the maintenance reminder.
See Resetting or Snoozing Maintenance Notifications for more
information.
S System Maintenance must be enabled to receive maintenance
notifications, as well as to view maintenance status and history
reports. See Managing the Maintenance System for more
information.
The following sections detail how to:
S Enable or disable the Maintenance System
S Enable or disable maintenance reminders on a per-component basis
S Reset or Snooze Maintenance Notifications
S View maintenance history
S Export the maintenance report
To Next Page
Loading...
Need help?
General
