Nordson ProBlue Flex Manual

System Settings
Networking
PLC
OLED User Interface
90
Part 1128351_02
E 2020 Nordson Corporation
Defining PLC Access
1. Do the following to define to set up your PLC communications:
Option Description Default Notes
PLC
Access
Enable/Disable full
read/write
communication
access between
the melter and your
PLC.
Enabled
S Enable provides full
read/write access.
S Disable prevents all
read/write access.
Read Only Enable/Disable full
read only
communication
access between
the melter and your
PLC.
S Enable provides
only full read access
if PLC Access is
Enabled.
S Disable provides
read/write access if
PLC Access is
Enabled.
PLC I/O
Data
Decide which PLC
data process you
want to use - Index,
Full Map (legacy) or
the new Flexible
Map.
Flex
map
Import/
Export
Flexible
Map
Decide whether to
Import a flexible
map configuration
file that was
created using
BBconn Cloud into
this melter or export
the .PLC file to a
USB to either
update the
configuration in
BBconn Cloud or to
import this PLC file
into another similar
unit.
S You must use
BBconn Cloud to
generate a
configuration
(flexible map) map
file - .PLC file.
S The default PLC
name is
Myflexcfg.plc.
S You cannot rename
this file.
S From BBconn
Cloud, save file to
the \PLC folder on
the USB drive. If the
folder does not exist,
you must first create
it.

Nordson ProBlue Flex Specifications

General

Brand	Nordson
Model	ProBlue Flex
Category	Melting Machines
Language	English