System Settings
Shift Schedule
OLED User Interface
80
Part 1128351_02
E 2020 Nordson Corporation
Setting Up Shift Schedules
Use Shifts to sort and filter production data reports based on a day and more
specifically, the hours of production. You can define up to 5 shifts per day.
Refer to Reports for more information.
1. Press the
on the Navigation pad to Enable Shift Schedule.
2. Select Add 1
st
shift, press > then do the following:
S Press to select which day or days of the week you want to set up a
heat schedule. When done, press the Down key to the bottom of the
list and select Done.
S Select Beginning, then press >, and enter the time you want the
Master Heater control to switch On. For 12-hour clock, use the
Up/Down key to toggle between AM and PM. Press
to continue.
S Select Ending, then press >, and enter the time you want the Master
Heater control to switch Off. For 12-hour clock, use the Up/Down key
to toggle between AM and PM. Press
3. select Done. Press < two times to return to the Shift Schedule menu.
4. Press
to return to the Home screen.
NOTES:
S You can have a maximum of 5 shifts.
S Shift schedules cannot overlap each other.
S If you remove a Shift schedule, then all shift settings (day or days of week
as well as Beginning/Ending times) are automatically deleted.
S Heat or Setback Events cannot cross into the next day.
To Next Page
Loading...
Need help?
General
