System Settings
Networking
OLED User Interface
87
Part 1128351_02
E 2020 Nordson Corporation
Setting Up WiFi
WIFI connectivity to Nordson equipment can be impacted by other
equipment operating within the same 2.4GHz channel. If you are not getting
the desired performance, change the Channel setting.
Note: The Web Server license is automatically granted with a WiFi card. If
you remove the WiFi card from, for example melter1 and put it into melter2,
then the Web Server license is no longer available for melter1, but is
available for melter2. You will need to purchase another Web Server license
for melter1.
1. Select WiFi, and press > to continue.
2. Enter or select the WiFi settings you want to use:
Option Description Default Minimum Maximum
Number of
Clients
Number of WiFi
users you want to
grant access to the
melter at any one
time.
2 1 4
Channel The channel that
corresponds to the
frequency of the
WiFi you are using.
6 1 11
SSID myNordsonAP Read only
Note: If you have more than one ProBlue Flex melter in the same location,
make sure each melter has a unique SSID name and that they are using
different WiFi channel numbers.
To Next Page
Loading...
Need help?
General
