Accessories
Tools
System Configuration
Modify Configuration Code
Tools
System Configuration
OLED User Interface
107
Part 1128351_02
E 2020 Nordson Corporation
Viewing Accessory Information
You can customize the melter with additional software and hardware features
and options. Most accessories are automatically detected, but some are not.
Typically, the instruction sheet that accompanies the accessory will indicate
whether or not you need to manually update the melter accessories list.
1. Select an accessory from the list and press > to view whether or not the
accessory has been successfully installed or not.
2. Press
to return to the Home screen, or press < to return to the
System Settings menu.
Updating the Configuration Code
Typically the instruction sheet that accompanies the accessory will indicate
whether or not you need to manually update the melter configuration code.
1. Select Modify Configuration Code and press > to view the
configuration list. Use the Up/Down buttons on the Navigation pad to
select the configuration that requires updating. Press the > button and
select the appropriate selection. When done, press
.
2. Press
to return to the Home screen, or press < to return to the
System Settings menu.
To Next Page
Loading...
Need help?
General
