Nordson ProBlue Flex Manual

System Settings
Networking
PLC
OLED User Interface
91
Part 1128351_02
E 2020 Nordson Corporation
Defining PLC Communications
Profinet, Ethernet/IP and Modbus TCP are natively supported and do not
require you to install a communication card.
S Refer to Connecting Profinet, Ethernet IP and Mod BUS/TCP for
more information.
S For all other communication cards, refer to documentation that came with
the communication kit for installation and setup instructions. You can also
get the appropriate instruction sheet for your communication card from
the BBconn Cloud Media Center.
Communication Kit Name Kit Part
Number
Instruction Kit
Part Number
KIT,ACCESS,PB
FLEX,COMM,PROFIBUS
1129161 1129124
KIT,ACCESS,PB
FLEX,COMM,ETHERCAT
1129162 1129293
KIT,ACCESS,PB
FLEX,COMM,CCLINK
1129163 1129294
KIT,ACCESS,PB
FLEX,COMM,SERCOS III
1129164 1129295
KIT,ACCESS,PB
FLEX,COMM,DEVICENET
1129165 1129296
KIT,ACCESS,PB
FLEX,COMM,POWERLINK
1129166 1129297
KIT,ACCESS,PB
FLEX,COMM,CCLINK IE
1129167 1129298
1. Select Specific Network and do the following to continue:
S For Profinet, enter the Profinet Station Name - the Profinet device name.
The default name is pbflex-pnio.
S The Profinet station name must follow these guidelines:
‐ Can contain letters and numbers
‐ Letters must be lower case
‐ Can contain a hyphen (-) or a period (.)
‐ Cannot begin or end with a hyphen (-)
‐ Cannot begin with the character string "port-xyz" (x, y, z = 0 to 9)
‐ Cannot have the form of an IP address n.n.n.n (n = 0 - 255)
2. When done, press < to return to the Network Settings menu or
to
return to the Home screen.

Nordson ProBlue Flex Specifications

General

Brand	Nordson
Model	ProBlue Flex
Category	Melting Machines
Language	English