Oki MICROLINE MX Series User Manual

Chapter 4 LinePrinter Plus Emulation (with PCL-II)
214
Bold Print
• Disable. Text is printed normally.
• Enable. Text is printed with a heavy line thickness.
Italic Print
• Disable. Text is printed normally.
• Forward Slant. Text is printed with a forward slant.
• Backward Slant. Text is printed with a backward slant.
Slashed Zero
This parameter allows you to print the numeral “0” with or without
the slash. This option applies to all character sets except OCR-A
and OCR-B.
• Disable. Zero is printed without a slash.
• Enable. Zero is printed with a slash.
Text Position
Specifies where the text will be positioned in the line space. When
set to Top-of-Line, text will be positioned at the top of the line
space. When set to Bottom-of-Line, the text will be positioned as if it
were at the bottom of a 6 lpi line space. The following example
shows both Top-of-Line and Bottom-of-Line text positions:
Top of Linespace
Bottom of 8 LPI Linespace
Bottom of 6 LPI Linespace
Dot
Row
Text Position
Top of Line
Text Position
Bottom of Line
1
1
2
3
4
5
6
7
8
9
10
11
12
Text Position
Top-of-Line
Text Position
Bottom-of-Line

Oki MICROLINE MX Series Specifications

General

Brand	Oki
Model	MICROLINE MX Series
Category	Printer
Language	English