Chapter 3 Operational Procedures
34
Figure 7. Loading New Paper into the Printer
6. Pull the new paper above and behind the ribbon mask, but in
front of the existing paper. See Figure 4 on page 24 for the
ribbon mask location. If necessary, gently press the existing
paper back.
7. Align the top edge of the new paper with the top perforation of
the existing paper.
8. Load the new paper over the existing paper. Open and load the
tractors one at a time to prevent the paper from slipping.
NOTE: Make sure that the top edge of the new paper lines up with
the top horizontal perforation of the last page.
New Paper
Existing Paper
To Next Page
Loading...
Need help?
General