Chapter 3 Operational Procedures
36
13. Press PAPER ADVANCE several times to make sure the paper
feeds properly beyond the tractors and over the lower paper
guide. Feed sufficient paper to ensure the paper stacks
correctly.
14. Close the printer top cover. Close the cabinet front door.
15. Press ON LINE/CLEAR
to place the printer in online mode and
resume printing.
Figure 9. Paper Slots on the Printers
NOTE: Perform steps 16 to 33 only if you are unable to load the
new paper over the existing paper.
16. Open both tractor doors.
17. Remove the old paper from the tractors. Allow the paper to fall
into the paper supply area.
18. Feed the new paper up through the paper slot. Hold the paper
to prevent it from slipping down through the paper slot.
Paper Slot
Cabinet Models Pedestal Models
Paper Slot
Metal Paper Guide
(MX1200 or
MX1200+ Only)
To Next Page
Loading...
Need help?
General