Orbit Reader 20 – User guide Version 1.8
Orbit Research Confidential and Proprietary Information 16
Sort (Name: Ascend)
The Sort menu item lets you change the order of the files on the SD card, using
Orbit Reader 20's built-in File Manager. The sorting options are - Name
(Ascend/Descend), Date, Size, and Last Read. The default setting for Sort is
Name (Ascend). To return to the File Manager, press Dot 7 from Stand-Alone
mode. To make a selection, press Select.
You cannot sort in Remote mode, but you can view and change the Menu
options. In Remote mode, press Select + Up Arrow. This command takes you to
the Menu. Use Down Arrow to Sort list item.
If you are in File Manager or Reader, press Select + Up Arrow to enter the Menu,
then Down Arrow to Sort.
If you are in Editor, first exit (Select, E OR Select, Select) and then press Select
+ Up Arrow to enter the Menu. Down Arrow to Sort.
Additionally, you may sort files within the selected category in Ascending or
Descending order. After selecting a category, press the Right Arrow until you
reach either Ascend or Descend in the list and press the Select button. Orbit
Reader 20 arranges the files in the indicated order. The default setting for this
menu item is Ascending (A to Z).
Split Words (Off)
The default setting for Split Words is Off. In the default setting, the Reader tries
to put as much content on the display as possible without splitting a word.
However, if you want 20 cells of braille, no matter the content, set Split Words to
On. When Split Words is on, the Reader shows partial words. When you pan to
the next 20 cells of braille, the remainder of that word appears at the beginning of
the line. To make a selection, press Select.
Filter Dot 7 (On)
The default setting for Filter Dot 7 is On. The Filter Dot 7 menu item lets you turn
off the Dot 7 that frequently appears in some BRL and BRF files. The Dot 7 is
filtered by default, but if you want to make a BRL or BRF file that uses eight-dot
braille, turn this setting off. To make a selection, press Select.
Wrapping (On)
The default setting for Wrapping is On. The Wrapping option is Orbit Reader 20's
way of reflowing files that are already formatted for embossing. Normally,
formatted files contain line-end indicators every 38-40 characters, which starts a
new line. This option eliminates extra spaces, making it easier to read on a 20-
cell display. To make a selection, press Select.
To Next Page
Loading...
Need help?
General
