Orbit Reader 20 User Manual

Orbit Reader 20 – User guide Version 1.8
Orbit Research Confidential and Proprietary Information 48
Toggle characters and attributes
Select + Dots 1 6
Braille color marking
Select + Dots 1 4
Select attributes to be displayed
Select + Dots 1 3
Set 8 characters per space
Space + Dots 2 3 6
Set unlimited characters per space
Space + Dots 1 3 6
Toggle 8/unlimited characters per space
Select + Dots 1 3 4 6
Cycle table reading options
Select + T
Cycle table header options
Select + H
Graphics labeler
Select + G
Adjust JAWS options
Select + Dots 1 2 3 6
JAWS window
Space + J
Announce time
t + Dots 7 and 8
Show script file name
Select + Dots 1 2 3 4 5
Run Jaws manager
Space + 2 3 7 8
Jaws Special Key Commands
Function
Keys
Ctrl + A - Ctrl + Z
Dot 8 + any letter
F1 - F10
Dot 7 + Computer Braille number 1 - 0 (0 = F10)
Ctrl + F1 - Ctrl + F10
Dot 8 + Computer Braille number 1 - 0
System Access
To connect Orbit Reader 20 to System Access, the device must be connected by
a Standard-A to Micro-B USB cable and set in HID protocol mode.
1. Press Select + Up Arrow to open menu
2. Down Arrow to the USB selection
3. Right Arrow to select HID
4. Press Select
5. Press Dot 7 to return to the last location
Another way to quickly switch to HID mode is to use the shortcut keys Space +
Dots 2 7.
After running System Access in HID mode, connect the USB cable and wait for
30 seconds. System Access will announce when Orbit Reader 20 gets
connected.
Dolphin Screen Reader
To connect Orbit Reader 20 to Dolphin Screen Reader, the device must be
connected by a Standard-A to Micro-B USB cable and set in HID protocol mode.

Orbit Reader 20 Specifications

General

Brand	Orbit
Model	Reader 20
Category	Card Reader
Language	English