Pioneer PDP-433CMX User Manual

154
Integrator Mode
5) Setting brightness enhancement at screen center
This function improves and enhances the brightness of the center of the screen.
To emphasize screen brightness = set to ON
To equalize screen emphasis = set to OFF
Factory preset : OFF
1 Enter integrator mode.
(See 5.4.1, “About the integrator mode.”)
The set ID will be displayed on the upper right where the
“– –“ mark is.
Select SET UP.
2 Move the cursor to BRT ENHANCE and use the SET button
to change the setting.
Each time the SET button is pressed, the setting will change
between ON and OFF.
Set BRT ENHANCE for each input (INPUT1~5).
And set either PC signal or video signal.
Select EXIT on screen 2 to return to screen 1.
(NOTE) The brightness enhancement function will not work
for magnified display with 2x2 MODE: ON.
(However, settings can be changed.)
Screen 1
Screen 2
]
]
2
EN :
:
:
RA
X
2
CE
L
N
V
B
S
T
MEBU
60
OFF
OFF
U
H
OEDM
O
U/L
INPUT1
ENTER EXITMENU SET SELECT
––
INTEGRATOR MENU
PICTURE WHITE BAL SCREEN SET UP OPTION
2
EN :
:
:
RA
X
2
CE
L
N
V
B
S
T
MEBU
60
OFF
OFF
U
H
OEDM
O
U/L
INPUT1
CHANGE EXITMENU SET SELECT
––
INTEGRATOR MENU
PICTURE WHITE BAL SCREEN SET UP OPTION

Pioneer PDP-433CMX Specifications

General

Brand	Pioneer
Model	PDP-433CMX
Category	Monitor
Language	English