Pioneer PDP-433CMX User Manual

168
Integrator Mode
19) Setting the cooling fan control formula
The back of the main unit is equipped with cooling fans.
This function switches the control formats of the cooling fans.
To use the internal temperature sensor to automatically control fans = select AUTO
To set a fixed number of maximum revolutions (thus cutting automatic control) = set MAX
(NOTE) The MAX setting is useful when special installation applies.
However, as fan rotation noise will be substantial, this setting should be used carefully in consideration of
the surrounding environment (particularly if the unit is installed in a quiet place).
For more details on installation, see Chapter 3, “Installation.”
Factory preset : AUTO
1 Enter integrator mode.
(See 5.4.1, “About the integrator mode.”)
The set ID will be displayed on the upper right where the
“– –“ mark is.
Select OPTION.
2 Move the cursor to FAN CONTROL and use the SET button
to change the setting.
Each time the SET button is pressed, the setting will switch
between AUTO and MAX.
FAN CONTROL applies to all inputs (INPUT1~5).
Screen 1
Screen 2
]
]
:OFFOEDMROMRRI
OTLROCFNAN
AEMNOTMINOR AMPSAL
INPUT1
––
INTEGRATOR MENU
CHANGE EXITMENU SET SELECT
T
H
:
:
0
CH
H
EPERATUREM
OUR METER
000 0
I:
:
––DNOSET.
AOTU:
PICTURE WHITE BAL SCREEN SET UP OPTION
:OFFOEDMROMRRI
OTLROCFNAN
AEMNOTMINOR AMPSAL
INPUT1
––
INTEGRATOR MENU
CHANGE EXITMENU SET SELECT
T
H
:
:
0
CH
H
EPERATUREM
OUR METER
000 0
I:
:
––DNOSET.
AOTU:
PICTURE WHITE BAL SCREEN SET UP OPTION

Pioneer PDP-433CMX Specifications

General

Brand	Pioneer
Model	PDP-433CMX
Category	Monitor
Language	English