Technical Bulletin PAGE: 1/3
Symptom
SC515-01 (Roller Shift Motor 1 Error) before total print volume reaches 10K.
Cause
Because the machine is still new, grease is not completely spread across the roller shift
motor (duplex transport motor), causing the motor to lose steps.
Subject: Troubleshooting SC515-01
Prepared by: Takeshi Toriumi
From: MFP/P Tech Service Dept., 1st Tech Service Sect.
Mechanical
Paper path
Product Safety
Electrical
Transmit/receive
Other ( )
Service manual revision
Retrofit information
Tier 2
Blue rollers: DRIVE rollers
White rollers: IDLE rollers