Ricoh CH-C1 User Manual

Technical Bulletin PAGE: 1/1
Model: Model Ch-C1 Office
Date: 07-Feb-14
No.: RD135074
Subject: Parts Information: Fusing unit was separated into
the IH coil and the unit without the coil
Prepared by: Chihiro Shimaji
From: 1st Tech Service Sect. MFP Tech Service Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Product Safety
Part information
Electrical
Transmit/receive
Other ( )
Action required
Service manual revision
Retrofit information
Tier 2
Before
After
Whole Fusing unit
Fusing unit without IH coil
Model
Old
NEW
Parts Name
Parts
Number
Parts Name
Parts
Number
Office NA
D13517
Whole Fusing Unit
D1364004
Fusing unit without IH coil
D1364251
IH Coil(100V)
D1364301
Office
NA/CHN/EU/AA
NA: D13617
CHN: D13521/D13621
EU: D13527/D13627
AA: D13529/D13629
Whole Fusing Unit
D1364005
Fusing unit without IH coil
D1364252
IH Coil（200V)
D1364302
Change: The service parts fusing unit was separated into the IH coil and the unit without the coil.
Reason: The IH coil is a “yield part”, and does not need to be replaced at PM. In addition, the price
of the unit is reduced.
IMPORTANT: When you replace the fusing unit, remove the IH coil unit from the old fusing unit
and attach it to the new fusing unit.
Note:
 D135=MP C6502SP, D136=MP C8002SP.
 This change will be applied to the Parts Catalog V1.02 or later.

Ricoh CH-C1 Specifications

General

Brand	Ricoh
Model	CH-C1
Category	Printer Accessories
Language	English