Technical Bulletin PAGE: 1/1
Service Manual Revision
There is no description of sensor locations in the field service manual.
Please add the following sensor location illustration to your field service manual in the
section:
5. Troubleshooting > Jam Detection
(Pg. 1276)
Sensor Locations
Subject: Manual Correction: Jam Detection(Sensor locations)
Prepared by: Chihiro Shimaji
From: MFP Tech Service Dept., 1st MFP Tech Service Sect.
Mechanical
Paper path
Product Safety
Electrical
Transmit/receive
Other ( )
Service manual revision
Retrofit information
Tier 2