To Next Page

To Previous Page

Printer Features

126

PS Menu

This section describes the user tools in the PS Menu under Printer Features.

Default settings are shown in bold type.

This menu appears only when the optional PostScript 3 unit is installed.

" Data Format

You can select a data format.

•Binary Data

• TBCP

This setting is not effective when operating the machine with a parallel or

EtherTalk connection.

When operating the machine with a parallel connection, and also if the binary

data is sent from the printer driver, the print job is canceled.

When operating the machine with an Ethernet connection, the print job is can-

celed under the following conditions;

• The printer driver data format is TBCP, and the data format selected on the

display panel is Binary Data.

• The printer driver data format is binary, and the data format selected on

the display panel is TBCP.

" Resolution

You can set the print resolution in dots per inch.

The default setting is 600 dpi.

Reference

p.4 “Accessing User Tools”

Ricoh LD320d User Manual

Other manuals for Ricoh LD320d