41
3. Troubleshooting
If Your Machine Does Not Operate As You
Want
When a Message Is Displayed
The following chart contains explanations for common messages. If other mes-
sages appear, follow the instructions as they are displayed.
Note
r For messages not listed here, see General Settings Guide.
Message Causes Solutions
Cannot detect original
size
Improper original is
placed. See p.18 “Sizes
difficult to detect”.
Select paper manually, not
with the Auto Paper Select
function, and do not use the
Auto Reduce/Enlarge func-
tion.
Input the both horizontal and
vertical sizes of the non-stan-
dard original.
Place the original on the expo-
sure glass. See p.19 “Placing
Originals on the Exposure
Glass” .
Original is not placed. Place your originals.
Check original orientation
Original is not placed
in the proper orienta-
tion.
Change original orientation.
Check paper size
Improper paper size is
set.
If you press the {Start} key,
copy will start onto the select-
ed paper.
Rotate Sort is unavail-
able
with this paper size
A size of paper for
which Rotate Sort is
not available is select-
ed.
Select a proper paper size. See
p.32 “Sort”.
Cannot dup. copy this
size
A paper size not avail-
able with the Duplex
function has been se-
lected.
The following paper sizes are
available for the Duplex func-
tion: 11"×17"L, 8
1
/
2
"×14" L
and 8
1
/
2
"×11"KL. Select one
of these sizes.
Max. number of sets is *
The number of copies
exceeds maximum
copy quantity.
You can change the maximum
copy quantity. See p.54 “Max.
Number of Sets”.
To Next Page
Loading...
Need help?
General
