Copier Functions
39
2
D When selecting two-sided copy-
ing, select the orientation [Top to
Top] or [Top to Bottom] using {U} or
{T}, and then press the {OK} key.
Note
r To change the copy orientation,
select the original icon whose
orientation is that required . See
p.34 “Original orientation and
completed copies”.
The “
Programmed” message ap-
pears.
E Select the paper size using {U} or
{T}.
F Place your originals, and then
press the {Start} key.
Series Copies
You can separately copy the front and
back of a two-sided original or two
facing pages of a bound original onto
two sheets.
v 2 Sided→1 Sided (Optional ARDF is
required)
Copies each side of a two-sided
original onto two separate pages.
v Book→1 Sided
Copies two facing pages of a bound
original (book) onto two separate
pages.
Note
r You cannot use the ADF or ARDF
with Book→1 Sided function.
r You cannot use the bypass tray
with Book→1 Sided function.
r See the following table for original
and copy paper sizes when using a
100% ratio with Book→1 Sided
function.
To Next Page
Loading...
Need help?
General
