To Next Page

To Previous Page

Troubleshooting

Orientation-Fixed Paper or Two-Sided Paper

Orientation-fixed (top to bottom) or two-sided paper (for example, letterhead

paper, prepunched paper, or copied paper) might not print correctly, depending

on how the originals and paper are placed.

Reference

p.55 “Letterhead Setting”

Note

r Select [On] in [Letterhead Setting] under [Copier Features] (User Tools), and then

place the original and paper as shown below. When printing with the printer

function, placing orientation is the same.

r Set the paper type to [Letterhead] in [Tray Paper Settings] under [System Set-

tings](User Tools). This setting is only available when the printer and scanner

units are installed. For details, see General Settings Guide.

v Original Orientation

When copying in this orientation using the duplex function, and loaded paper ori-

entation is L, place originals as shown below:

When copying in this orientation using the duplex function, select [Always Specify]

in [Orientation] under [Copier Features](User Tools). Place originals, and then select

as the original orientation.

Exposure glass ADF or ARDF

Ricoh LD320d User Manual

Other manuals for Ricoh LD320d