Copy Functions
47
2
Changing the number of sets
You can change the number of copy sets during copying.
Important
❒ This function can only be used when the Sort function is turned on.
A While "Copying..." is displayed, press the {Clear/Stop} key.
B Press [Sets].
C Enter the number of copy sets with the number keys, and then press [Resume].
Copying starts again.
Note
❒ The number of sets you can enter in step
C
differs depending on when the
{Clear/Stop} key is pressed.
Duplex (Type 2 only)
There are two types of Duplex available.
Important
❒ You cannot use the bypass tray with this function.
❖ 1 Sided → 2 Sided
Copies 2 one-sided pages to 1 two-sided page.
To Next Page
Loading...
Need help?
General
