Copying from the Bypass Tray
25
2
Copying from the Bypass Tray
Use the bypass tray to copy onto OHP transparencies, thick paper, envelopes,
and paper that cannot be loaded in the paper trays.
Important
❒ Paper that has a vertical length of 90-297 mm (3.55"-11.69") and a horizontal
length of 148-600 mm (5.83"-23.62") can be copied from the bypass tray. How-
ever, when paper larger than 433 mm (17.1") in size is used, the paper may
become wrinkled, may not be fed into the machine, or may cause paper jams.
❒ The machine can detect the following sizes as regular size paper:
•Metric version
A3L, A4KL, A5KL, 8" × 13"L
•Inch version
11" × 17"L, 8
1
/
2
" × 14"L, 8
1
/
2
" × 11"KL, 5
1
/
2
" × 8
1
/
2
"L
If you want to use the size of paper other than the above, be sure to specify
the size.
Reference
“Copy Paper”, About This Machine
Loading Paper on the Bypass Tray
Use the bypass tray to copy onto OHP transparencies, thick paper, envelopes
and paper that cannot be loaded in the paper trays.
Important
❒ When copying on OHP transparencies or paper heavier than 105 g/m
2
(about 28 lb.),
you need to specify the type and size of paper.
❒ The maximum number of sheets you can load into the bypass tray depends
on the paper type. Load only as much paper as can be held between the paper
guides on the bypass tray.
A Open the bypass tray.
ARB016S
To Next Page
Loading...
Need help?
General
