Troubleshooting When Using the Scanner Function
54
5
When You Cannot Send Scanned Files
The following sections describe likely causes of and solutions for network deliv-
ery and e-mail sending-related problems.
When You Cannot Browse the Network to Send a Scanned File
This section describes likely causes of and possible solutions for the browser net-
work failing to operate when files are sent.
When the TWAIN Driver Cannot Be Started
This section describes likely causes of and possible solutions for the TWAIN
driver failing to operate.
The Network Delivery Function Cannot Be Used
This section describes likely causes of and possible solutions for the Network
Delivery function failing to operate.
Problem Cause Solution
The network cannot be
browsed when specify-
ing the destination
folder.
The following machine settings
may not be correct:
• IPv4 address
• Subnet Mask
Check the settings. See “Network
Settings”, General Settings
Guide.
Problem Cause Solution
The Scanner Properties
dialog box cannot be
displayed.
Advanced encryption has been
specified in the extended security
setting.
For details about the extended securi-
ty setting, contact the administrator.
Problem Cause Solution
The network delivery
function cannot be
used.
The delivery software may be an
old version or a security setting
may be specified.
Contact the administrator.
The network delivery
function cannot be
used.
The network delivery function
setting is not correct.
Specify it correctly. See “Settings
Required to Use the Network De-
livery Scanner”, General Settings
Guide.
To Next Page
Loading...
Need help?
General
