Display Status
Item
Input
Displays the selected input signals.
Resolution
Displays the resolution.
This item appears when you select [Computer 1], [Computer 2], or [HDMI] as an input signal.
Frequency
Displays the synchronous frequency.
This item appears when you select [Computer 1], [Computer 2], or [HDMI] as an input signal.
Sync
Displays the synchronous signal polarity.
This item appears when you select [Computer 1] or [Computer 2] as an input signal.
Signal Format
Displays the Y/Pb/Pr signal format.
This item appears when you select [Y/Pb/Pr] or [HDMI] (Y/Pb/Pr signals) as an input signal.
Video Mode
Displays the video signal color format.
This item appears when you select [Video] as an input signal.
Lamp Time
Displays the lamp usage time.
Lamp Reset Count
Displays the number of lamp replacements.
Total Time
Displays the projector usage time.
Total CO2 Reduction
Displays the total reduction in CO
2
caused by setting the lamp to the eco mode.
5. Changing the Projector Settings
106
To Next Page
Loading...
Need help?
General
