Controlling and Monitoring the Projector Using
Crestron RoomView
The projector supports Crestron RoomView. Crestron RoomView is a system developed by Crestron
Electronics for controlling and monitoring multiple devices on a network. For more information, see the
Crestron Electronics Web site.
What you can do with Crestron RoomView
• Controlling and monitoring the projector using a web browser
Using Crestron WebUI, you can control and monitor the projector from your computer. For
details, see page 131 "Displaying Crestron WebUI" and page 132 "Using Crestron
WebUI".
• Controlling and monitoring the projector using Crestron software
Using the Crestron RoomView Express/Crestron RoomView Server Edition, software supplied
by Crestron Electronics, you can monitor the projector, communicate with the help desk, and
send emergency messages. For details, see the Crestron Electronics Web site.
To use this function, specify the following settings:
• Connect the projector to a network using [Network Settings]
• Select [On] in [Crestron RoomView] under [Network Application Settings]
• Specify other items in [Crestron RoomView] as required
For details, see page 93 "Network Settings Menu" and page 101 "Network Application Settings
Menu".
Displaying Crestron WebUI
• To use Crestron WebUI, Adobe Flash
®
Player must be installed on your computer.
1. Start your Web browser
2. Enter "http://(projector's IP address)/" in your Web browser's URL bar.
The top screen of Crestron WebUI appears.
Controlling and Monitoring the Projector Using Crestron RoomView
131
To Next Page
Loading...
Need help?
General
