Connecting Equipment to the Projector
• Do not place the power cord and connection cable in a way that might cause someone to trip
and fall. The product might fall over and cause an injury.
Various equipments can be connected to the projector.
Turn off the power to any equipment before connecting it to the projector. Be sure to read the manual for
the applicable equipment before connecting it to the projector.
Connecting a Computer
• Some computers cannot be connected to the projector. Before connecting a computer to the
projector, check the output terminals and signal compatibility.
Using an RGB cable
Connect an RGB cable to the Computer1 In port of the projector and to the RGB output of a computer.
To output audio from the speaker on the projector, connect an audio cable to the Audio In port of the
projector and to the audio output of a computer.
• Use the RGB cable provided with the projector.
• You can also use the Computer2 In/Monitor Out port to input RGB signals if [Computer 2
Terminal] in [Default Settings 1] is specified as [Input].
Using an HDMI cable
Connect an HDMI cable to the HDMI ports of the projector and the computer.
Connecting Equipment to the Projector
31
To Next Page
Loading...
Need help?
General
