Inputting Text
Use the keyboard that is displayed on screen to input text on the setting screen.
1. Use the [ ], [ ], [ ], and [ ] buttons on the remote control to select a character on the
screen.
The selected character is highlighted in orange.
2. Press the [Enter] button.
The selected character appears in the text area.
3. After inputting all the characters, select [OK].
4. Press the [Enter] button.
The text is input.
• You can also use the number buttons on the remote control to input numbers.
Operating a Computer with the Remote Control
You can operate a computer using the projector's remote control. This function can be used when the
mouse remote control receiver is connected to a computer.
This function is available with RICOH PJ X3340N/WX3340N/WX4240N.
A computer with a USB port that supports USB 2.0 can be used. Supported operating systems are
Windows XP, Vista, and 7.
• Connect the mouse remote control receiver to a computer only when operating the computer with
the remote control. When operating the projector with the remote control while the mouse remote
control receiver is connected to the computer, the pointer on the computer screen also moves
according to the key operations of the remote control.
1. Connect the mouse remote control receiver to the computer.
1. Preparations for Using the Projector
24
To Next Page
Loading...
Need help?
General
