Connecting an External Display Device
You can display the projected image on another display simultaneously by connecting the projector and
the external display device. The image signals input into the Computer1 In port can be displayed on an
external display device.
To connect an external display, specify [Computer 2 Terminal] to [Output]. Then connect an RGB cable
to the Computer2 In/Monitor Out port of the projector and the RGB input of an external display device.
• Only the image input from a computer or AV equipment is displayed on the external display
device. Images generated by the projector, such as menu screens, are not displayed on the
external display device.
• Use the external display device's settings to adjust its display.
Connecting an External Speaker
You can output the audio signal to an external speaker. To connect an external speaker, connect an
audio cable to the Audio Out port of the projector and the audio input of an external speaker.
• There is no sound output from the projector's speaker when an external speaker is connected.
• You can adjust the sound output from the external speaker by using the [Volume] button.
1. Preparations for Using the Projector
34
To Next Page
Loading...
Need help?
General
