1. [Menu] button
Displays the menu screen. Press it again to close the menu screen.
2. [Input] button
Switches the signal input. The input signal changes each time the button is pressed.
3. [AV Mute] button
Temporarily blanks the screen and mutes the audio. For details, see page 47 "Temporarily Blanking the
Image and Muting the Audio".
4. Arrow buttons
Used to operate the menu screen and the value bar.
5. Number buttons
Used to enter numbers.
6. [Power] button
Turns the projector on and off.
7. [Freeze] button
Temporarily freezes the image. For details, see page 48 "Freezing the Image".
8. [Magnify] button
Displays the magnification ratio bar. Press it, and then specify the magnification ratio using the [ ] and [ ]
buttons. For details, page 46 "Enlarging the Image".
Remote Control Parts and Their Functions
19
To Next Page
Loading...
Need help?
General
