Restoring Settings to Their Default Settings
1. Press the [Menu] button.
2. Select the Default Settings 2 menu tab, and then press the [ ] button.
3. Select [Reset All], and then press the [Enter] button.
4. Select [OK] in the confirm screen, and then press the [Enter] button.
• The [Network Setting Wizard] screen appears after [Reset All] is executed. Specify the network
settings. If you want to skip the network settings, select [Cancel] on the [Network Setting Wizard]
screen. For details about the [Network Setting Wizard] screen, see page 62 "Connecting the
Projector to a Network".
• The following settings cannot be reset with this function:
• [User Logo] in [Default Settings 1]
To reset the registered user logo, select [Reset Logo] in [Default Settings 1].
• [Startup Password] in [Default Settings 2]
• [Administrator Password] in [Network Application Settings]
To reset the registered passwords, contact your service representative.
Restoring Settings to Their Default Settings
77
To Next Page
Loading...
Need help?
General
