6. Troubleshooting
This chapter explains the basic problems and troubleshooting methods when an indicator light is lit.
Indicator Display List
The projector uses the [Power] button, indicators, and beeps to notify you if a malfunction occurs. Check
the indicator's status, and implement the following measures.
Indicator location
1. [Power] button
2. Lamp indicator
3. Temp indicator
" " means the indicator is flashing.
Status Causes Solutions
The projector does not turn
on.
The projector has malfunctioned. Disconnect the power cord, and
contact your service
representative.
"Hardware Error" was
displayed, and the projector
turned off during operation.
The projector has malfunctioned. Disconnect the power cord, wait a
while, and then turn on the
projector again.
If the problem cannot be resolved,
contact your service
representative.
109
To Next Page
Loading...
Need help?
General
